Earn {{points}} for every {{amount}} you spend and turn them into discounts at checkout.
Join nowDTF Pressing Instructions
Follow these instructions carefully to achieve the best results with your Direct to Film (DTF) transfers. Proper application ensures long-lasting, vibrant prints.
Recommended Heat Press Settings
- Temperature: 315°F – 325°F
- Time: 10–15 seconds
- Pressure: Medium to firm
👉 A commercial heat press is strongly recommended for best results.
Step-by-Step Application
1. Pre-Press Garment
- Press the garment for 3–5 seconds
- Removes moisture and wrinkles
- Ensures a smooth surface
2. Position the Transfer
- Place the transfer design side down on the garment
- Make sure it is straight and properly aligned
3. Heat Press
- Press at 315–325°F for 10–15 seconds
- Apply medium to firm pressure
4. Peel the Film
- Allow the transfer to cool slightly (warm peel)
- Peel the film smoothly from one corner
👉 If the design lifts, press again for a few more seconds.
5. Re-Press (Important)
- Cover with parchment paper or Teflon sheet
- Press again for 5–10 seconds
👉 This step improves durability and finish.
Fabric Compatibility
DTF transfers work on a wide range of materials:
- Cotton
- Polyester
- Cotton/Poly blends
- Light and dark fabrics
Washing Instructions
For long-lasting results:
- Wait 24 hours before washing
- Wash inside out
- Use cold water
- Do not bleach
- Tumble dry low or air dry
- Do not iron directly on the design
Common Mistakes to Avoid
- ❌ Using low pressure
- ❌ Incorrect temperature
- ❌ Skipping the re-press step
- ❌ Peeling too early or too aggressively
- ❌ Using household irons (not recommended)
Need Help?
If you have questions or need assistance with your transfers:
📞 919-533-7944
📧 info@sassydamedesigns.com
💬 Use the Chat With Us feature
Ways to redeem
Turn your points into something you love.
